crhv www.vishay.com vishay techno revision: 27-may-13 1 document number: 68002 for technical questions, contact: te1resistors @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thick film chip resistors, high voltage features ? high voltage up to 3000 v ? outstanding stability < 0.5 % ? flow solderable ? custom sizes available ? automatic placement capability ? tape and reel packaging available ? termination style: 3-sided wraparound termination or single termination flip chip standard; 5-sided wraparound termination available ? internationally standardized sizes ? suitable for solderable, epoxy bondable, or wi re bondable applications ? termination material: sold er-coated nickel barrier standard; gold, palladium silv er, platinum gold, platinum silver or platinum palladium gold terminations available ? multiple styles, termination materials and configurations, allow wide design flexibility ? non-magnetic terminations available ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information abou t parts that are rohs-compliant and/ or parts that are non-rohs-compliant. for example, parts ? with lead (pb) terminations are not ro hs-compliant. please see the information/ tables in this datasheet for details. notes ? for non-standard sizes, lower values or high er power rating requirement, contact factory. (1) continuous working voltage shall be or maximum working voltage, whichever is less. (2) resistance values below 1 g ? are calibrated at 100 v dc , and values of 1 g ? and above are calibrated at 1000 v dc . calibration at other voltages available upon request. (3) contact factory for tighter tolerances. (4) reference only: not for all values specified. consult factory for your size and value. note ? for additional information on packaging, refer to the surface mount resistor packaging document ( www.vishay.com/doc?31543 ). available available standard electrical specifications global ? model case size power rating p 70 c w maximum working voltage (1) v resistance range (2) ? tolerance (3) % temperature coefficient (4) (- 55 c to + 150 c) ppm/c crhv1206 1206 0.30 1500 2m to 1g 1, 2, 5, 10, 20 100 1.1g to 8g 2, 5, 10, 20 crhv1210 1210 0.45 1750 4m to 1g 1, 2, 5, 10, 20 100 1.1g to 10g 2, 5, 10, 20 crhv2010 2010 0.50 2000 6m to 1g 1, 2, 5, 10, 20 100 1.1g to 10g 2, 5, 10, 20 11g to 35g 5, 10, 20 crhv2510 2510 0.60 2500 10m to 1g 1, 2, 5, 10, 20 100 1.1g to 10g 2, 5, 10, 20 11g to 40g 5, 10, 20 crhv2512 2512 1.0 3000 12m to 1g 1, 2, 5, 10, 20 100 1.1g to 10g 2, 5, 10, 20 11g to 50g 5, 10, 20 global part number information new global part numbering: crhv1206af100mfkfb (preferred part number format) global model size term style term material resistance value tolerance tcr solder termination packaging crhv 1206 1210 2010 2510 2512 a = 3-sided b = top only c = 5-sided f = nickel barrier a = palladium silver b = platinum gold c = gold d = platinum silver e = platinum palladium gold m = m ? g = g ? 4m70 = 4.7 m ? 10m0 = 10 m ? 1g00 = 1 g ? f = 1 % g = 2 % j = 5 % k = 10 % m = 20 % k = 100 ppm l = 150 ppm n = 200 ppm r = 250 ppm m = 300 ppm w = 350 ppm p = 500 ppm d = sn95/ag5, hsd e = sn100 f = sn95/ag5 n = no solder s = sn62/pb36/ag2, hsd t = sn90/pb1 0 b = bulk f = t/r (full reel) 1 = t/r (1000 pcs) 5 = t/r (500 pcs) t = t/r (250 pcs min.) w = waffle tray historical part nu mbering: crhv1206af1006f100e2 (will continue to be accepted) crhv 1206 a f 1006 f 100 e2 historical model size term style term material resistance value tolerance tcr solder termination p x r v120 af1 6 rh 00m b c k f f
crhv www.vishay.com vishay techno revision: 27-may-13 2 document number: 68002 for technical questions, contact: te1resistors @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 environmental specifications operating temperature: - 55 c to + 150 c ? life: less than 0.5 % change when tested at full rated power ? short time overload: less than 0.5 % ? r (reference only: not for all valu es specified. consult factory ? for your size and value.) ? ? ? ? (reference only: not for all values specified. consult factory for your size and value.) mechanical specifications resistive element ruthenium oxide encapsulation glass substrate 96 % alumina termination solder-coated nickel barrier standard. gold, palladium silver, platinum gold, platinum silver, plat inum palladium gold terminations available. solder finish pure tin or tin/lead solder alloys standard. tin/silver or tin/lead/silver solder alloys available. voltage coefficient of resistance chart size value ( ? ) vcr (ppm/v) furt her instructions crhv1206 2m to 199m 25 values over 200m, consult factory crhv1210 4m to 200m 25 values over 200m, consult factory crhv2010 6m to 99m 15 values over 1g, consult factory 100m to 1g 20 crhv2510 10m to 99m 10 values over 1g, consult factory 100m to 1g 15 crhv2512 12m to 999m 10 values over 5g, consult factory 1g to 5g 25 dimensions in inches (millimeters) model length (l) 0.006 (0.152) width (w) 0.006 (0.152) thickness (t) 0.002 (0.051) crhv1206 0.125 0.063 0.025 crhv1210 0.125 0.100 0.025 crhv2010 0.200 0.100 0.025 crhv2510 0.250 0.100 0.025 crhv2512 0.250 0.126 0.025 derating curve 0.025 [0.635] max. l t w termination style a ? (3-sided wraparound) 0.025 [0.635] max. w t l termination style b ? (top conductor only) t w l 0.025 0.635 ma. termination style c ? (5-sided wraparound) 20 50 70 100 150 120 100 80 60 40 20 0 ambient temperature in c % of rated power
crhv www.vishay.com vishay techno revision: 27-may-13 3 document number: 68002 for technical questions, contact: te1resistors @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) use solder termination n for applications requiring epoxy bondable mounting, and solder terminations d or s for applications re quiring solderable mounting. (2) while not recommended, palladium silver terminations could be used for solderable applications when using a solder alloy contai ning silver. if the solder paste being used to solder the palladium silver terminated parts to the boards does not have a silver-based compo sition, then the silver in the terminations could begin to leach when it is exposed to liquidus non-silver-based solders, causing the potent ial for solderability and/or solder joint issues. (3) standard solder plating for the nickel barrier parts are solder terminations e or t. plated termination f and hot solder dipped terminations d or s are also available. type termination material termination style termination style/ material code solder termination code solderable nickel barrier 3-sided (wraparound) af e or t (standard); d, f or s (optional) (3) top only (flip chip) bf epoxy bondable/ ? solderable platinum palladium gold 3-sided (wraparound) ae n (standard); d or s (optional) (1) top only (flip chip) be 5-sided (wraparound) ce wire bondable/ ? epoxy bondable gold 3-sided (wraparound) ac n top only (flip chip) bc 5-sided (wraparound) cc epoxy bondable palladium silver (2) 3-sided (wraparound) aa n top only (flip chip) ba 5-sided (wraparound) ca platinum gold 3-sided (wraparound) ab top only (flip chip) bb 5-sided (wraparound) cb platinum silver 3-sided (wraparound) ad top only (flip chip) bd 5-sided (wraparound) cd
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
